CLI Guide
advertise med location-identication
To advertise a location identier, congure the system.
Syntax
advertise med location-identification {coordinate-based value | civic-based
value | ecs-elin value}
To return to the default, use the no advertise med location-identification {coordinate-
based value | civic-based value | ecs-elin value} command.
Parameters
coordinate-based
value
Enter the keywords coordinate-based then the coordinated based location in
hexadecimal value of 16 bytes.
civic-based value Enter the keywords civic-based then the civic based location in hexadecimal format.
The range is from 6 to 255 bytes.
ecs-elin value Enter the keywords ecs-elin then the Emergency Call Service (ecs) Emergency
Location Identication Number (elin) numeric location string. The range is from 10 to 25
characters.
Defaults uncongured.
Command Modes CONFIGURATION (conf-lldp)
Supported Modes Full-Switch
Command History
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
• ECS — Emergency call service such as dened by TIA or the national emergency numbering association
(NENA)
• ELIN — Emergency location identication number, a valid North America Numbering Plan format telephone
number supplied for ECS purposes.
Related Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-cong lldp — displays the LLDP running conguration.
advertise med power-via-mdi
To advertise the Extended Power via MDI TLV, congure the system.
Syntax
advertise med power-via-mdi
To return to the default, use the no advertise med power-via-mdi command.
Defaults uncongured.
Command Modes CONFIGURATION (conf-lldp)
844 Link Layer Discovery Protocol (LLDP)