CLI Guide
show cong
Display the current conguration of the selected VLAN.
Syntax
show config
Command Modes INTERFACE VLAN
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-if-vl-100)#show config
!
interface Vlan 1
description a
no ip address
mtu 2500
shutdown
Dell(conf-if-vl-100)#
show vlan
Display the current VLAN congurations on the switch.
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the following information:
• VLAN ID
• VLAN name (left blank if none is congured)
• Spanning Tree Group ID
• MAC address aging time
• IP address
id vlan-id (OPTIONAL) Enter the keyword id then a number from 1 to 4094. Only information on
the VLAN specied is displayed.
name vlan-name (OPTIONAL) Enter the keyword name then the name congured for the VLAN. Only
information on the VLAN named is displayed.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
828 Layer 2