CLI Guide
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related Commands show mac learning-limit — displays details of the mac learning-limit.
mac learning-limit reset
Reset the MAC address learning-limit error-disabled state.
Syntax
mac learning-limit reset
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
show cam mac stack-unit
Display the content addressable memory (CAM) size and the portions allocated for MAC addresses and for MAC ACLs.
Syntax
show cam mac stack-unit unit_number port-set port-pipe count [vlan vlan-id]
[interface interface]
Parameters
stack-unit
unit_number
(REQUIRED) Enter the keyword stack-unit followed by a stack member number to
select the stack unit for which to gather information. The range is 0 to 5.
port-set port-pipe (REQUIRED) Enter the keywords port-set followed by a Port-Pipe number to select
the Port-Pipe for which to gather information. The range is 0.
address mac-addr (OPTIONAL) Enter the keyword address followed by a MAC address in the
nn:nn:nn:nn:nn:nn format to display information on that MAC address.
dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC addresses learned
dynamically by the switch.
static (OPTIONAL) Enter the keyword static to display only those MAC address specically
congured on the switch.
interface interface (OPTIONAL) Enter the keyword interface followed by the interface type, slot and
port information:
Layer 2 821