CLI Guide

show isis hostname
Display IS-IS host names congured or learned on the system.
Syntax
show isis hostname
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show isis hostname
System Id Dynamic Name Static Name
*F100.E120.0013 Force10 ISIS
Dell#
show isis interface
Display detailed IS-IS interface status and conguration information.
Syntax
show isis interface [interface]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
• For Loopback interface, enter the keyword loopback then a number from 0 to
16383.
• For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a VLAN, enter the keyword vlan then a number from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell>show isis int
GigabitEthernet 0/7 is up, line protocol is up
Intermediate System to Intermediate System (IS-IS) 795