CLI Guide

Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
CAUTION: Use caution when you enter this command. Back up your conguration prior to using this
command or your IS-IS conguration will be erased.
clear isis
Restart the IS-IS process. All IS-IS data is cleared.
Syntax
clear isis [tag] {* | database | traffic}
Parameters
tag (Optional) Enter an alphanumeric string to specify the IS-IS routing tag area.
* Enter the keyword * to clear all IS-IS information and restart the IS-IS process. This
command removes IS-IS neighbor information and IS-IS LSP database information and
the full SPF calculation is done.
database Clears IS-IS LSP database information.
trac Clears IS-IS counters.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
clns host
Dene a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs and system IDs.
Syntax
clns host name nsap
Parameters
name Enter an alphanumeric string to identify the name-to-NSAP mapping.
nsap Enter a specic NSAP address that is associated with the name parameter.
Defaults Not congured.
Command Modes ROUTER ISIS
Supported Modes Full–Switch
Intermediate System to Intermediate System (IS-IS) 759