CLI Guide

ftp
for the current FTP conguration
igmp
for the current IGMP conguration
interface
for the current interface conguration
line
for the current line conguration
lldp
for the current lldp conguration
logging
for the current logging conguration
management-
route
for the current Management port forwarding conguration
monitor
for the current Monitor conguration
snmp
for the current SNMP conguration
uplink-state-
group
for the uplink state group conguration
users
for the current users conguration
congured (OPTIONAL) Enter the keyword configured to display line card interfaces with non-
default congurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for the running
conguration and the start-up conguration.
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show running-config
Current Configuration ...
! Version 9-4(0-180)
!
boot system stack-unit 0 primary tftp://10.11.8.12/dv-ci-stomp-tc-1-a1
!
redundancy auto-synchronize full
!
hostname Dell
...
Example
Dell#show running-config status
running-config bytes 5063, checksum 0xF6F801AC
startup-config bytes 4835, checksum 0x764D3787
Dell#
Example
Dell#sh running-config interface vlan
!
interface Vlan 1
ip address dhcp
mtu 2500
File Management 75