CLI Guide

show cong (from PROTOCOL LLDP mode)
Displays the LLDP conguration.
Syntax
show config
Command Modes PROTOCOL LLDP
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell(conf-lldp)#show conf
!
protocol lldp
Dell(conf-lldp)#
show vlan
Displays the current VLAN congurations on the switch.
Syntax
show vlan [brief |id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the following information:
• VLAN ID
• VLAN name (left blank if none is congured.)
• Spanning Tree Group ID
• MAC address aging time
• IP address
id vlan-id (OPTIONAL) Enter the keyword id followed by a number from 1 to 4094. Only
information on the VLAN specied is displayed
name vlan-name (OPTIONAL) Enter the keyword name followed by the name congured for the VLAN.
Only information on the VLAN named is displayed.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
584 Interfaces