CLI Guide

Defaults none
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
This feature groups two LAGs to work in tandem as a supergroup. For example, if one LAG goes down, the other
LAG is taken down automatically, providing an alternate path to reroute trac, avoiding oversubscription on the
other LAG. You can use both static and dynamic (LACP) LAGs to congure failover groups. For more information,
refer to the Port Channel chapter in the Dell Networking OS Conguration Guide.
Related Command
group — groups two LAGs in a supergroup (“fate-sharing group”).
show interfaces port-channel — displays information on congured Port Channel groups.
show cong
Display the current conguration of the selected LAG.
Syntax
show config
Command Modes INTERFACE PORTCHANNEL
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-if-po-1)#show config
!
interface Port-channel 1
no ip address
shutdown
Dell(conf-if-po-1)#
show interfaces port-channel
Display information on congured Port Channel groups.
Syntax
show interfaces port-channel [channel-number] [brief| description]
Parameters
channel-number For a Port Channel interface, enter the keyword port-channel followed by a number.
The range is from 1 to 128.
570 Interfaces