CLI Guide

NOTE: This command also enables you to view information corresponding to a
range of ports. However, for Open Networking (ON) platforms the notation
for specifying port range in the command is dierent from how you specify in
non-ON platforms.
For non-ON platforms, you can specify multiple ports as slot/port-
range. For example, if you want to display information corresponding to all
ports between 1 and 4, specify the port range as
show interfaces
interface-type 1/1 - 4.
For ON platforms, you can specify multiple ports as slot/port/
[subport] - slot/port/[subpot]. For example, if you want to
display information corresponding to all ports between 1 and 4, specify the
port range as show interfaces interface-type 1/1/1 - 1/4/1.
summary (OPTIONAL) Enter the keyword summary to display the current summary of dampening
data, including the number of interfaces congured and the number of interfaces
suppressed, if any.
detail (OPTIONAL) Enter the keyword detail to display detailed interface dampening data.
Defaults none
Command Modes EXEC
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM and added support to display the interface congurations
corresponding to a range of ports.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show interfaces dampening
Interface Supp Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Te 3/2 Up 0 0 20 800 4500 120
Te 3/8 Up 0 0 5 750 2500 20
Dell#
Related Commands
dampeningcongures dampening on an interface.
show interfaces — displays information on a specic physical interface or virtual interface.
show interfaces congured — displays any interface with a non-default conguration.
show interfaces description
Display the descriptions congured on the interface.
Syntax
show interfaces [interface] description
Parameters
interface Enter one of the following keywords and slot/port or number information:
For the management interface on the stack unit enter the keyword
ManagementEthernet followed by the slot/port information. The slot range is 0-0
and the port range is 0.
Interfaces 553