CLI Guide

show inventory — Displays the I/O Aggregator type, components (including media), Dell Networking OS version
including hardware identication numbers and congured protocols.
show ip interface — Displays Layer 3 information about the interfaces.
show memory — Displays the stack unit(s) status.
show interfaces status — Displays all interfaces congured using the interface range command.
show interfaces congured
Displays any interface with a non-default conguration.
Syntax
show interfaces configured
Command Modes
EXEC
EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
(ManagementEthern
et)
show interfaces dampening
Display interface dampening information.
Syntax
show interfaces dampening [[interface] [summary] [detail]]
Parameters
interface (Optional) Enter one of the following keywords and slot/port or number information:
For a Port Channel interface, enter the keywords port-channel then a number.
The range is from 1 to 128.
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
552 Interfaces