CLI Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands disable — globally disables GVRP.
gvrp registration
Congure the GVRP register type.
Syntax
gvrp registration {fixed | normal | forbidden}
To return to the default, use the gvrp register normal command.
Parameters
xed Enter the keyword fixed then the VLAN range in a comma-separated VLAN ID set.
normal Enter the keyword normal then the VLAN range in a comma-separated VLAN ID set.
This setting is the default.
forbidden Enter the keyword forbidden then the VLAN range in a comma-separated VLAN ID
set.
Defaults normal
Command Modes CONFIGURATION-INTERFACE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
Fixed registration prevents an interface, congured using the command line, to belong to a VLAN (static
conguration) from being uncongured when it receives a Leave message. Therefore, Registration mode on that
interface is xed.
Normal registration is the default registration. The port’s membership in the VLAN depends on GVRP. The
interface becomes a member of a VLAN after learning about the VLAN through GVRP. If the VLAN is removed
from the port that sends GVRP advertisements to this device, the port stops being a member of the VLAN.
To advertise or learn about VLANs through GVRP, use the forbidden command when you do not want the
interface.
Related Commands show gvrp — displays the GVRP conguration including the registration.
protocol gvrp
Access GVRP protocol — (cong-gvrp)#.
Syntax
protocol gvrp
GARP VLAN Registration (GVRP) 507