CLI Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
9.1(1.0) Introduced on the S5000.
Example
Dell#show fc alias
Zone Alias Name al1
0x030303
Dell#
Related Commands fc alias — creates a zone alias name.
show fcoe-map
Display the Fibre Channel and FCoE conguration parameters in FCoE maps.
Syntax
show fcoe-map
Parameters None
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
9.1.1.0 Introduced on the S5000.
Usage Information
Use the show fcoe-map command to display the FC and FCoE parameters used to congure server-facing
Ethernet (FCoE) and fabric-facing FC ports in all FCoE maps on the switch.
In each FCoE map, the values for the fabric ID and FC-MAP that identify the SAN fabric to which FC storage
trac is sent, and the FCoE VLAN to be used must be unique.
An FCoE map is used to identify the SAN fabric to which FCoE storage trac is sent. It also virtualizes the switch
with FC Flex IO module FC ports, so that they appear to downstream server CNA ports as FCoE Forwarder (FCF)
ports on an FCoE network.
Example
Dell#show system stack-unit 0 iom-mode
Unit Boot-Mode Next-Boot
------------------------------------------------
0 standalone standalone
Dell#show fcoe-map
Fabric Name SAN_FABRIC
Fabric Type npiv
Fabric Id 1002
FC FLEXIO FPORT 475