CLI Guide
Related Commands
show fc alias — displays the congured alias.
fc zoneset
Create a zoneset.
Syntax
fc zoneset zoneset_name [member]
To delete a zoneset, use the no fc zoneset zoneset_name [member] command.
Parameters
zoneset_namemem
ber
Enter the zoneset name.
Enter the WWPN, FC-ID, or Alias name.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
9.1(1.0) Introduced on the S5000.
Example
Dell(conf)#fc zoneset test1
Dell(conf-fc-zoneset-test1)#member ?
WORD Zone Name
Dell(conf-fc-zoneset-test1)#member
Related Commands
show fc zoneset — displays the congured and active zoneset.
show fcoe-map — displays the fabric parameters.
fcoe-map
Create an FCoE map which contains the parameters used to congure the links between server CNAs and a SAN fabric. Apply the FCoE
map on a server-facing Ethernet port.
Syntax
fcoe-map map-name
Parameters
map-name Maximum: 32 alphanumeric characters.
Defaults None
Command Modes CONFIGURATION
INTERFACE
Supported Modes Full–Switch
FC FLEXIO FPORT 467