CLI Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
9.1(1.0) Introduced on the S5000.
Example without
member
Dell(conf)# fc zone z1
Dell(conf-fc-zone-z1)#
Example with
member
Dell(conf)#fc zone test
Dell(conf-fc-zone-test)#member ?
WORD WWN(00:00:00:00:00:00:00:00), portID(000000), or Alias
name(word)
Dell(conf-fc-zone-test)#member
Related Commands
show fc zone — displays the congured zone.
show fcoe-map — displays the fabric parameters.
fc alias
Create a zone alias name.
Syntax
fc alias ZoneAliasNamemember name
To delete a zone alias name, use the no fc zone ZoneAliasName command.
Parameters
ZoneAliasNameme
mber name
Enter the zone alias name.
Enter the WWPN, port ID, or domain/port.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the MXL and IOA.
9.1(1.0) Introduced on the S5000.
Example
Dell(conf)#fc alias test12
Dell(conf-fc-alias-test12)#?
end Exit from configuration mode
exit Exit from Alias config mode
member Add Alias member
no Negate a command or set its defaults
show Show alias profile configuration
Dell(conf-fc-alias-test12)#member ?
WORD WWN(00:00:00:00:00:00:00:00), or portID(123000)
466 FC FLEXIO FPORT