CLI Guide

Version Description
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands show ipv6 prex-list — View the selected IPv6 prex-list.
show ipv6 prex-list
Displays the specied IPv6 prex list.
Syntax
show ipv6 prefix-list detail {prefix-list name} | summary
Parameters
detail Display a detailed description of the selected IPv6 prex list.
prex-list name Enter the name of the prex list.
NOTE: There is a 140-character limit for prex list
names.
summary Display a summary of RPF routes.
Command Modes EXEC
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Command History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands ipv6 prex-list — congures an IPv6 prex-list.
IPv6 MBGP Commands
Multiprotocol BGP (MBGP) is an enhanced BGP that enables multicast routing policy throughout the Internet and connecting multicast
topologies between BGP and autonomous systems (AS).
MBGP is implemented as per IETF RFC 1858.
show ipv6 mbgproutes
Display the selected IPv6 MBGP route or a summary of all MBGP routes in the table.
Syntax
show ipv6 mbgproutes ipv6-address prefix-length | summary
Parameters
ipv6-address prex-
length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prex length in
the /x format. The range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
366 Border Gateway Protocol IPv4 (BGPv4)