CLI Guide

• set tag
If the route map is not congured, the default is deny (to drop all routes).
Defaults Not congured.
Command Modes ROUTER BGP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
With the Dell Networking OS version 8.3.1.0 and later, you can use the redistribute command to advertise the
IGP cost as the MED on redistributed routes. When you set the route-map with metric-type internal and applied
outbound to an EBGP peer/peer-group, the advertised routes corresponding to those peer/peer-groups have the
IGP cost set as MED.
If you do not congure the default-metric command, in addition to the redistribute command, or there
is no route map to set the metric, the metric for redistributed static and connected is “0”.
To redistribute the default route (0.0.0.0/0), congure the neighbor default-originate command.
Related Commands neighbor default-originate — injects the default route.
redistribute ospf
Redistribute OSPF routes into BGP.
Syntax
redistribute ospf process-id [[match external {1 | 2}] [match internal]]
[route-map map-name]
To stop redistribution of OSPF routes, use the no redistribute ospf process-id command.
Parameters
process-id Enter the number of the OSPF process. The range is from 1 to 65535.
match external {1 |
2}
(OPTIONAL) Enter the keywords match external to redistribute OSPF external
routes. You can specify 1 or 2 to redistribute those routes only.
match internal (OPTIONAL) Enter the keywords match internal to redistribute OSPF internal routes
only.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a congured route map.
Defaults Not congured.
Command Modes ROUTER BGP
Supported Modes Full–Switch
Border Gateway Protocol IPv4 (BGPv4) 329