CLI Guide

count Enter the number paths supported. The range is from 2 to 64.
Defaults none
Command Modes CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands bgp add-path — allows the advertisement of multiple paths for the same address prex without the new paths
implicitly replacing any previous ones.
neighbor advertisement-interval
Set the advertisement interval between BGP neighbors or within a BGP peer group.
Syntax
neighbor {ip-address | peer-group-name} advertisement-interval seconds
To return to the default value, use the no neighbor {ip-address | peer-group-name}
advertisement-interval command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group to set the advertisement interval for all routers in the
peer group.
seconds Enter a number as the time interval, in seconds, between BGP advertisements. The range
is from 0 to 600 seconds. The default is 5 seconds for internal BGP peers and 30
seconds for external BGP peers.
Defaults
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Command Modes ROUTER BGP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
neighbor advertisement-start
To send BGP routing updates, set the minimum interval before starting.
Syntax
neighbor {ip-address} advertisement-start seconds
Border Gateway Protocol IPv4 (BGPv4) 311