CLI Guide
peer-group peer-
group-name
(OPTIONAL) Enter the keyword peer-group then the name of the peer group.
in (OPTIONAL) Enter the keyword in to view only events on inbound BGP messages.
out (OPTIONAL) Enter the keyword out to view only events on outbound BGP messages.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To remove all congured debug commands for BGP, enter the no debug ip bgp command.
debug ip bgp keepalives
Display information about BGP keepalive messages.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] keepalives [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name]
keepalives [in | out] command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
peer-group peer-
group-name
(OPTIONAL) Enter the keyword peer-group then the name of the peer group.
in (OPTIONAL) Enter the keyword in to view only inbound keepalive messages.
out (OPTIONAL) Enter the keyword out to view only outbound keepalive messages.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To remove all congured debug commands for BGP, enter the no debug ip bgp command.
debug ip bgp notications
Allows you to view information about BGP notications received from neighbors.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] notifications [in | out]
306 Border Gateway Protocol IPv4 (BGPv4)