CLI Guide

indeed negotiated (after executing the clear ip bgp soft in command), BGP sends a route-refresh
request to the neighbor and receives all of the peer’s updates.
Related Commands clear ip bgp — activates inbound policies without resetting the BGP TCP session.
capture bgp-pdu neighbor
Enable capture of an IPv4 BGP neighbor packet.
Syntax
capture bgp-pdu neighbor ipv4-address direction {both | rx | tx}
To disable capture of the IPv4 BGP neighbor packet, use the no capture bgp-pdu neighbor ipv4-
address command.
Parameters
ipv4-address Enter the IPv4 address of the target BGP neighbor.
direction {both | rx |
tx}
Enter the keyword direction and a direction — either rx for inbound, tx for
outbound, or both.
Defaults Not congured.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands
capture bgp-pdu max-buer-size — species a size for the capture buer.
show capture bgp-pdu neighbor — displays BGP packet capture information.
capture bgp-pdu max-buer-size
Set the size of the BGP packet capture buer. This buer size pertains to both IPv4 and IPv6 addresses.
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-102400000 Enter a size for the capture buer.
Defaults 40960000 bytes.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Border Gateway Protocol IPv4 (BGPv4) 301