CLI Guide

Parameters

+ (OPTIONAL) Enter + to add a metric-value to the redistributed routes.

- (OPTIONAL) Enter - to subtract a metric-value from the redistributed routes.

metric-value Enter a number as the new metric value. The range is from zero (0) to 4294967295.

Defaults Not congured.

Command Modes ROUTE-MAP

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

set automatic-tag — computes the tag value of the route.

set metric-type — species the route type assigned to redistributed routes.

set tag — species the tag assigned to redistributed routes.

set metric-type

To assign a new route type for routes redistributed to OSPF, congure a lter.

Syntax

set metric-type {internal | external | type-1 | type-2}

Parameters

internal Enter the keyword internal to assign the Interior Gateway Protocol metric of the next

hop as the route’s BGP MULTI_EXIT_DES (MED) value.

external Enter the keyword external to assign the IS-IS external metric.

type-1 Enter the keyword type-1 to assign the OSPF Type 1 metric.

type-2 Enter the keyword type-2 to assign the OSPF Type 2 metric.