CLI Guide
Example
Dell#show ip prefix-list detail
Ip Prefix-list with the last deletion/insertion: PL_OSPF_to_RIP
ip prefix-list PL_OSPF_to_RIP:
count: 3, range entries: 1, sequences: 5 - 25
seq 5 permit 1.1.1.0/24 (hit count: 0)
seq 10 deny 2.1.0.0/16 ge 23 (hit count: 0)
seq 25 permit 192.0.0.0 bitmask 192.0.0.0 (hit count: 800)
show ip prex-list summary
Display a summary of the congured prex lists.
Syntax
show ip prefix-list summary [prefix-name]
Parameters
prex-name (OPTIONAL) Enter a text string as the name of the prex list, up to 140 characters.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show ip prefix-list summary
Ip Prefix-list with the last deletion/insertion: PL_OSPF_to_RIP
ip prefix-list PL_OSPF_to_RIP:
count: 3, range entries: 1, sequences: 5 - 25
Route Map Commands
When you create an access-list without any rule and then applied to an interface, the ACL behavior reects implicit permit.
To congure route maps and their redistribution criteria, use the following commands.
continue
To a route-map entry with a higher sequence number, congure a route-map.
Syntax
continue [sequence-number]
Parameters
sequence-number (OPTIONAL) Enter the route map sequence number. The range is from 1 to 65535. The
default is: no sequence number
Defaults Not congured
Command Modes ROUTE-MAP
Supported Modes Full–Switch
Access Control Lists (ACL) 195