CLI Guide

Command Modes PREFIX-LIST
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
Sequence numbers for this lter are automatically assigned starting at sequence number 5.
If you do not use the ge or le options, only packets with an exact match to the prex are ltered.
Related Commands
permit — congures a lter to pass packets.
seq — congures a drop or permit lter with a specied sequence number.
ip
prex-list
Enter the PREFIX-LIST mode and congure a prex list.
Syntax
ip prefix-list prefix-name
Parameters
prex-name Enter a string up to 16 characters long as the name of the prex list, up to 140 characters
long.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Prex lists redistribute OSPF and RIP routes meeting specic criteria.
Related Commands
show ip route list — displays IP routes in an IP prex list.
show ip prex-list summary — displays a summary of the congured prex lists.
permit
Congure a lter that passes packets meeting the criteria specied.
Syntax
permit ip-prefix [ge min-prefix-length] [le max-prefix-length]
Parameters
ip-prex Specify an IP prex in the network/length format. For example, 35.0.0.0/8 means match
the rst 8 bits of address 35.0.0.0.
192 Access Control Lists (ACL)