CLI Guide

Dell#
show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of the designated stack member.
Syntax
show hardware stack-unit 0 {buffer {total-buffer | unit 0-0 {port 42-53
{buffer-info | queue {0-12 buffer-info | all buffer-info} } | total buffer}}
{cpu {data-plane statistics | management statistics | private-mgmt statistics}
| drops [unit 0-0 [port {42-53 | range}] | user-port { 1-12 | range }] | fpga
registers | fru dump | stack-port 9-12 | unit 0-0 {counters | details | ipmc-
replication | port-stats [detail] | register | table-dump WORD}}
show hardware stack-unit 0 {buffer [ unit 0 ] total buffer | buffer unit 0
interface all queue [(0-14) | a11] buffer-info} {cpu {data-plane statistics |
management statistics | private-mgmt statistics} | drops [unit 0-0 | fpga
registers | fru dump | stack-port 9-12 | unit 0-0 {counters | details | ipmc-
replication | port-stats [detail] | register | table-dump WORD}}
Parameters
stack-unit 0
{command-option}
Enter the keywords stack-unit then 0 to select the stack member and then enter one
of the following command options to display a collection of data based on the option
entered.
buer Enter the keyword buffer. To display buer statistics for a all interface, enter the
keyword interface followed by the keyword all. To display the forwarding plane
statistics containing the packet buer usage per port per stack unit, enter the keyword
unit then 0 for port-pipe 0, then port and the port number (42-53, and then
buffer-info.
buer Enter the keyword buffer. To display the total buer statistics for the stack unit, enter
the keywords total-buffer. To display the forwarding plane statistics containing the
packet buer usage per port per stack unit, enter the keyword
unit then 0 for port-pipe
0, then port and the port number (42-53, and then buffer-info. To display the
forwarding plane statistics containing the packet buer statistics per COS per port, enter
the keyword unit then 0 for port-pipe 0, then port and the port number (42-53, and
then queue 0-12 buffer-info or all buffer-info.
cpu {data-plane
statistics |
management
statistics | private-
mgmt statistics}
Enter the keyword cpu then one of the keywords to display the CPU statistics: data-
plane statistics, management statistics, or private-mgmt
statistics
.
drops [unit 0-0
[port {42-53 |
range}]
Enter the keyword drops to display internal drops on the selected stack member.
Optionally, use the keyword unit with 0 to select port-pipe 0, and then use port
42-53 or range to select a port or range on that port-pipe.
drops interface
interface
Enter the keyword drops to display internal drops on the selected stack member.
user-port { 1-12 |
range }]
Enter the keyword user-port then 1-12 or range to display the statistics on a
specied line-card port or range of ports.
fpga registers Enter the keywords fpga registers to display fpga details.
1384 Debugging and Diagnostics