CLI Guide
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show storm-control broadcast tengigabitethernet 3/8
Broadcast storm control configuration
Interface Direction Packets/Second
----------------------------------------
TenGig 3/8 Ingress 1000
Dell#
show storm-control multicast
Display the storm control multicast conguration.
Syntax
show storm-control multicast [interface]
Parameters
interface (OPTIONAL) Enter one of the following interfaces to display the interface specic storm
control conguration:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show storm-control multicast gigabitethernet 1/1
Multicast storm control configuration
Interface Direction Packets/Second
-----------------------------------------
Te 2/2 Ingress 5
Dell#
storm-control multicast (Interface)
Congure the percentage of multicast trac allowed on the interface.
Syntax
storm-control multicast packets_per_second in
Storm Control 1245