CLI Guide
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module..
Usage Information This command displays internal software driver information, which may be useful during troubleshooting switch
initialization errors, such as a downed Port-Pipe.
show logging auditlog
Displays an audit log.
Syntax
show logging auditlog
Defaults none
Command Modes EXEC
Supported Modes
Full–Switch
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.5(0.0) Introduced on the MXL.
Example
Dell(conf)#show logging audit
Related Commands clear logging auditlog — clears audit log.
terminal monitor
Congure the system to display messages on the monitor/terminal.
Syntax
terminal monitor
To return to default settings, use the terminal no monitor command.
defaults Disabled.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
1230 Simple Network Management Protocol (SNMP) and Syslog