CLI Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When you congure the snmp-server trap-source command, the system messages logged to the history
table are also sent to the SNMP network management station.
Related Commands
show logging — displays information logged to the history buer.
logging history size
Specify the number of messages stored in the system logging history table.
Syntax
logging history size size
To return to the default values, use the no logging history size command.
Parameters
size Indicate a value as the number of messages to be stored. The range is from 0 to 500. The
default is 1 message.
Defaults 1 message
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When the number of messages reach the limit you set with the logging history size command, older
messages are deleted as newer ones are added to the table.
Related Commands
show logging — displays information logged to the history buer.
logging monitor
Specify which messages are logged to Telnet applications.
Syntax
logging monitor [level]
To disable logging to terminal connections, use the no logging monitor command.
Parameters
level Indicate a value from 0 to 7 or enter one of the following parameters: emergencies,
alerts, critical, errors, warnings, notifications, informational, or
debugging. The default is 7 or debugging.
Defaults 7 or debugging
1224 Simple Network Management Protocol (SNMP) and Syslog