CLI Guide
Dell Networking OS Version : 9.11(0.0)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Flash : A: 4.1.1.1 [booted] B: 4.1.1.1
Boot Selector : 4.1.0.1
Memory Size : 2147483648 bytes
Temperature : 55C
Voltage : ok
Switch Power : GOOD
Product Name : Dell PowerEdge FN 410S IOM
Mfg By : DELL
Mfg Date : 2016-02-24
Serial Number : CN2829862O0018
Part Number : 0T6W0JA01
Piece Part ID : CN-0T6W0J-28298-62O-0018
PPID Revision : A01
Service Tag : N/A
Expr Svc Code : N/A
Chassis Svce Tag : 0000000
Fabric Id : A1
Asset tag :
PSOC FW Rev : 0xd
ICT Test Date : 6-2-24
ICT Test Info : 0x0
Max Power Req : 16896
Fabric Type : 0x3
Fabric Maj Ver : 0x1
Fabric Min Ver : 0x2
SW Manageability : 0x4
HW Manageability : 0xd
Max Boot Time : 3 minutes
Link Tuning : unsupported
Auto Reboot : enabled
Burned In MAC : f4:8e:38:0e:e6:14
No Of MACs : 3
Dell#
Related Commands
asset-tag —Assign and store unique asset-tag to the stack member.
show version — Displays the Dell version.
show processes memory —Displays the memory usage based on the running processes.
show diag — Displays the data plane and management plane input and output statistics of a particular stack
member.
show tech-support
Displays a collection of data from other show commands, necessary for Dell Networking technical support to perform troubleshooting on
Aggregators.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keyword stack-unit to view CPU memory usage for the stack
member designated by unit-id. The range is 0 to 5.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the SPACE
BAR to view the next 24 lines. Press the ENTER key to view the next line of text.
122 Control and Monitoring