CLI Guide
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information When enabled, the system begins creating entries in the binding table for the specied VLANs.
NOTE: Learning only happens if there is a trusted port in the VLAN.
Related Commands ip dhcp snooping trust — congures an interface as trusted.
show ip dhcp snooping
Display the contents of the DHCP binding table.
Syntax
show ip dhcp snooping binding
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands clear ip dhcp snooping — clears the contents of the DHCP binding table.
username
Establish an authentication system based on user names.
Syntax
username name [nopassword | {password | secret} [encryption-type] password]
[privilege level]
If you do not want a specic user to enter a password, use the nopassword option.
To delete authentication for a user, use the no username name command.
Parameters
name Enter a text string for the name of the user up to 63 characters.
nopassword Enter the keyword nopassword to specify that the user should not enter a password.
password Enter the keyword password followed by the encryption-type or the password.
secret Enter the keyword secret followed by the encryption-type or the password.
encryption-type Enter an encryption type for the password that you enter.
• 0 directs Dell Networking OS to store the password as clear text. It is the default
encryption type when using the
password option.
1182 Security