CLI Guide

Parameters
mac address Enter the keyword mac then the MAC address of the host to which the server is leasing
the IP address.
vlan-id vlan-id Enter the keywords vlan-id then the VLAN to which the host belongs. The range is
from 2 to 4094.
ip ip-address Enter the keyword ip then the IP address that the server is leasing.
interface type
Enter the keyword interface then the type of interface to which the host is
connected.
For a ten-Gigabit Ethernet interface, enter the keyword tengigabitethernet.
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword lease then the amount of time the IP address is leased. The range is
from 1 to 4294967295.
Defaults none
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related Commands show ip dhcp snooping — displays the contents of the DHCP binding table.
ip dhcp snooping database renew
Renew the binding table.
Syntax
ip dhcp snooping database renew
Defaults none
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.19.0 Introduced on the MXL 10/40GbE Switch IO Module.
1180 Security