CLI Guide

ip ssh rsa-authentication (EXEC)
Add keys for the RSA authentication.
Syntax
ip ssh rsa-authentication {my-authorized-keys WORD}
To delete the authorized keys, use the no ip ssh rsa-authentication {my-authorized-keys}
command.
Parameters
my-authorized-keys
WORD
Enter the keywords my-authorized-keys then the lename of the RSA authorized-
keys.
Defaults none
Command Modes EXEC
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
If you want to log in without being prompted for a password, log in through RSA authentication. To do that, rst
add the SSHv2 RSA public keys to the list of authorized keys. This command adds the specied RSA keys to the
following le: flash://ADMIN_DIR/ssh/authorized-keys-username (where username is the user
associated with this terminal).
NOTE: The no form of this command deletes the le flash://ADMIN_DIR/ssh/ authorized-
keys-username le.
Related Commands
show ip ssh rsa-authentication — displays the RSA authorized keys.
ip ssh rsa-authentication (Cong) — enables RSA authentication.
ip ssh server
Congure an SSH server.
Syntax
ip ssh server {ciphers cipher-list} {enable | port port-number} [kex key-
exchange-algorithm] [mac hmac-algorithm] [version {1 | 2}]
To disable SSH server functions, use the no ip ssh server {ciphers cipher-list} {enable |
port port-number} {kex key-exchange-algorithm command.
Parameters
enable Enter the keyword enable to start the SSH server.
ciphers cipher-list Enter the keyword ciphers and then a space-delimited list of ciphers that the SSH
server supports. The following ciphers are available.
• 3des-cbc
1170 Security