CLI Guide

Defaults Not congured.
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
radius-server deadtime
Congure a time interval during which non-responsive RADIUS servers to authentication requests are skipped.
Syntax
radius-server deadtime seconds
To disable this function or return to the default value, use the no radius-server deadtime command.
Parameters
seconds Enter a number of seconds during which non-responsive RADIUS servers are skipped.
The range is from 0 to 2147483647 seconds. The default is 0 seconds.
Defaults 0 seconds
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.3(0.0) Supported on the M I/O Aggregator.
radius-server host
Congure a RADIUS server host.
Syntax
radius-server host {hostname | ipv4-address | ipv6-address} [auth-port port-
number] [retransmit retries] [timeout seconds] [key [encryption-type] key]
Parameters
hostname Enter the name of the RADIUS server host.
ipv4-address | ipv6-
address
Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X) of the RADIUS server host.
auth-port port-
number
(OPTIONAL) Enter the keywords auth-port then a number as the port number. The
range is from zero (0) to 65535. The default port-number is 1812.
retransmit retries (OPTIONAL) Enter the keyword retransmit then a number as the number of
attempts. This parameter overwrites the radius-server retransmit command.
The range is from zero (0) to 100. The default is
3 attempts.
1152 Security