CLI Guide

output of memory statistics to the designated stack member. Refer to Example (stack-
unit).
summary (OPTIONAL) Enter the keyword summary to view a summary view CPU utilization of
processes related to line card processing. Refer to Example (summary).
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Example (summary)
Dell#show processes cpu summary
CPU utilization 5Sec 1Min 5Min
------------------------------------
UNIT1 4% 3% 2%
Example
(management-unit)
Dell#show processes cpu management-unit 5
CPU utilization for five seconds:4%/0%; one minute:4%; five minutes:4%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
0x00000000 2120 212 10000 3.77% 3.77% 3.77% 0 system
0x00000112 2472940 247294 10000 0.79% 0.61% 0.65% 0 sysdlp
0x000000e4 495560 49556 10000 0.20% 0.25% 0.24% 0 sysd
0x0000013d 34310 3431 10000 0.00% 0.02% 0.00% 0 lacp
0x00000121 4190 419 10000 0.00% 0.02% 0.00% 0 iscsiOpt
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
Dell#
Example (stack-unit)
Dell#show process cpu stack-unit 1
CPU utilization for five seconds:4%/0%; one minute:3%; five minutes:2%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
0x763a3000 17981680 1798168 10000 3.00% 2.67% 2.67% 0 KP
0x762ba000 0 0 0 0.00% 0.00% 0.00% 0 debugagt
0x762d9000 0 0 0 0.00% 0.00% 0.00% 0 F10StkMgr
0x762f8000 214590 21459 10000 0.00% 0.00% 0.00% 0 lcMgr
0x76319000 7890 789 10000 0.00% 0.00% 0.00% 0 dla
0x76344000 155770 15577 10000 0.00% 0.00% 0.02% 0 sysAdmTsk
0x76363000 583230 58323 10000 0.00% 0.00% 0.02% 0 timerMgr
0x76381000 658850 65885 10000 0.00% 0.17% 0.08% 0 PM
0x76299000 80110 8011 10000 0.00% 0.00% 0.00% 0 diagagt
0x763c3000 0 0 0 0.00% 0.00% 0.00% 0 evagt
--More--
Related Commands
show diag — displays the data plane or management plane input and output statistics of the designated
component of the designated stack member.
show hardware system-ow — displays Layer 3 ACL or QoS data for the selected stack member and stack
member port-pipe.
show interfaces stack-unit — displays information on all interfaces on a specic stack member.
Control and Monitoring 115