CLI Guide

“abcd CNTL v ]e”. When the password is created, you do not use the CNTL + v key combination and enter
“abcd]e”.
NOTE: The question mark (?) is not a supported character.
Related Commands
show running-cong — views the current conguration.
privilege level (CONFIGURATION mode) — controls access to the command modes within the switch.
enable restricted
Allows Dell Networking technical support to access restricted commands.
Syntax
enable restricted [encryption-type] password
To disallow access to restricted commands, use the no enable restricted command.
Parameters
encryption-type
(OPTIONAL) Enter the number 7 as the encryption type.
Enter 7 followed a text string as the hidden password. The text string must be a
password that was already encrypted by a Dell Networking router.
Use this parameter only with a password that you copied from the show running-
config le of another Dell Networking router.
password Enter a text string, up to 32 characters long, as the clear text password.
Defaults Not congured.
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Only Dell Networking Technical Support sta use this command.
enable secret
Change the password for the enable command.
Syntax
enable secret [level level] [encryption-type] password
To delete a password, use the no enable secret [encryption-type] password [level level]
command.
Parameters
level level (OPTIONAL) Enter the keyword level then a number as the level of access. The range
is from 1 to 15.
1142 Security