CLI Guide
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information By default, the aaa authorization commands command congures the system to check both EXEC level
and CONFIGURATION level commands. To enable only EXEC-level command checking, use the command no
aaa authorization config-commands
. role method is supported only on Full-Switch mode.
aaa authorization exec
Set parameters that restrict (or permit) a user’s access to EXEC-level commands.
Syntax
aaa authorization exec {name | default} {local || tacacs+ || if-authenticated
|| none}
To disable authorization checking for EXEC level commands, use the no aaa authorization exec
command.
Parameters
name Dene a name for the list of authorization methods.
default Dene the default list of authorization methods.
local Use the authorization parameters on the system to perform authorization.
tacacs+ Use the TACACS+ protocol to perform authorization.
none Enter the keyword none to apply no authorization.
Defaults none
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
aaa reauthenticate enable
Enable re-authentication of user whenever there is a change in the authenticators.
Syntax
aaa reauthenticate enable
To disable the re-authentication option, use the no aaa reauthenticate enable command.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
1134 Security