CLI Guide
Remote Monitoring (RMON)
The Dell Networking Operating System (OS) remote monitoring (RMON) is based on IEEE standards, providing both 32-bit and 64-bit
monitoring and long-term statistics collection.
RMON supports the following RMON groups, as dened in RFC-2819, RFC-3273, RFC-3434 and RFC-4502:
• Ethernet Statistics Table; RFC-2819
• Ethernet Statistics High-Capacity Table; RFC-3273, 64bits
• Ethernet History Control Table; RFC-2819
• Ethernet History Table; RFC-2819
• Ethernet History High-Capacity Table; RFC-3273, 64bits
• Alarm Table; RFC-2819
• High-Capacity Alarm Table (64bits); RFC-3434, 64bits
• Event Table; RFC-2819
• Log Table; RFC-2819
• User History; RFC-4502
• Probe Conguration (Capabilities, SoftwareRev, HardwareRev, Date Time and ResetControl); RFC-4502
RMON does not support the following statistics:
• etherStatsCollisions
• etherHistoryCollisions
• etherHistoryUtilization
NOTE
: Only simple network management protocol (SNMP) GET/GETNEXT access is supported. Congure RMON using the
RMON commands. Collected data is lost during a chassis reboot.
Topics:
• rmon alarm
• rmon collection history
• rmon collection statistics
• rmon event
• rmon hc-alarm
• show rmon
• show rmon alarms
• show rmon events
• show rmon hc-alarm
• show rmon history
• show rmon log
• show rmon statistics
50
Remote Monitoring (RMON) 1103