CLI Guide
metric metric-value (OPTIONAL) Enter the keyword metric then a number as the metric value. The range is
from 0 to 16.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a congured route map.
Defaults Not congured.
Command Modes ROUTER RIP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
router rip
To congure and enable RIP, enter ROUTER RIP mode.
Syntax
router rip
To disable RIP, use the no router rip command.
Defaults Disabled.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information To enable RIP, assign a network address using the network command.
Example
Dell(conf)#router rip
Dell(conf-router_rip)#
Related Commands
network — enables RIP.
show cong
Display the changes you made to the RIP conguration. The default values are not shown.
Syntax
show config
Command Modes ROUTER RIP
Supported Modes Full–Switch
Routing Information Protocol (RIP) 1099