CLI Guide

Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Introduced on the MXL switch.
Usage Information To access this command, enter the class-map command. After the class map is identied, you can congure the
match criteria.
Use this command to match an IP class-map against a single VLAN ID .
Related Commands class-mapidenties the class map.
match ip vrf
Uses a VRF as the match criterion for an L3 class map.
Syntax
match ip vrf vrf-id
To remove VRF as the match criterion, use the no match ip vrf vrf-id command.
Parameters
vlan vlan-id Enter the keyword vrf and then the ID of the VRF. The range is from 1 to 63.
Defaults none
Command Modes CONF-CLASS-MAP
Supported Modes Full–Switch
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Introduced on the MXL switch.
Usage Information To access this command, enter the class-map command. After the class map is identied, you can congure the
match criteria.
Use this command to match an IP class-map against a single VRF ID .
Related Commands class-mapidenties the class map.
description
Add a description to the selected policy map or QoS policy.
Syntax
description {description}
To remove the description, use the no description {description} command.
1058 Quality of Service (QoS)