CLI Guide
Command Modes CONFIGURATION
Supporting Modes Full–Switch
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, MXL
ip ssh rekey
Congures the time rekey-interval or volume rekey-limit threshold at which to re-generate the SSH key during an SSH session.
Syntax
ip ssh rekey [time rekey-interval] [volume rekey-limit]
To reset to the default, use no ip ssh rekey [time rekey-interval] [volume rekey-limit]
command.
Parameters
time minutes
Enter the keywords time then the amount of time in minutes. The range is from 10 to
1440 minutes. The default is 60 minutes
volume rekey-
limit
Enter the keywords volume then the amount of volume in megabytes. The range is from 1
to 4096 to megabytes. The default is 1024 megabytes
Defaults The default time is 60 minutes. The default volume is 1024 megabytes.
Command Modes CONFIGURATION mode
Supported Modes Full–Switch
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, MXL
1056 Quality of Service (QoS)