CLI Guide

Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#conf
Dell(conf)#protocol spanning-tree pvst
Dell(conf-pvst)#no disable
Dell(conf-pvst)#vlan 2 bridge-priority 4096
Dell(conf-pvst)#vlan 3 bridge-priority 16384
Dell(conf-pvst)#
Dell(conf-pvst)#show config
!
protocol spanning-tree pvst
no disable
vlan 2 bridge-priority 4096
vlan 3 bridge-priority 16384
Dell#
Usage Information After you enable PVST+, the device runs an STP instance for each VLAN it supports.
Related Commands
disable — disables PVST+.
show spanning-tree pvst — displays the PVST+ conguration.
show spanning-tree pvst
View the Per-VLAN spanning tree conguration.
Syntax
show spanning-tree pvst [vlan vlan-id] [brief] [guard]
Parameters
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID. The range is 1 to 4094.
brief (OPTIONAL) Enter the keyword brief to view a synopsis of the PVST+ conguration
information.
interface (OPTIONAL) Enter one of the interface keywords along with the slot/port information:
• For a Port Channel interface, enter the keyword port-channel then a number: The
range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
guard (OPTIONAL) Enter the keyword guard to display the type of guard enabled on a PVST
interface and the current port state.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
Per-VLAN Spanning Tree Plus (PVST+) 1039