Deployment Guide

Passwords and Credentials
You can view or configure users who access the I/O Aggregator device in the Passwords and Credentials
section of the Security page.
This page lists the active users who are currently logged on to the device and all users in the local user
database.
On this page, you can perform the following tasks:
• View users
• Add users
• Edit users
• Delete users
Viewing Users
You can view users who have access to the I/O Aggregator device from the Passwords and Credentials
section of the Security page.
Dell Blade I/O Manager can have a maximum of 64 users.
1. From the navigation menu, click Security.
2. In the Passwords and Credentials section, click Edit.
The Password Settings dialog box appears.
This dialog box lists the following information about each user:
• Number — Displays the system-assigned number. This number is not static but can change
depending on users who are deleted. For example, user 3 becomes user 2 if the original user 2 is
deleted.
• User ID — Displays the user ID.
• User Name — Displays the user name. User names do not need to be unique.
• Access Level — Displays 0 for read-only or 15 for read-write.
• Login Status — Displays whether the user is logged in or logged out.
• Protocol — Displays what protocols the user logged in to the I/O Aggregator device. Multiple
protocols listed indicate the user access the device through multiple methods.
• Location — Displays the IP address of the host accessing the device.
Adding Users
You can add users who have access to the I/O Aggregator device in the Passwords and Credentials
section of the Security page.
You can add a maximum of 64 users.
1. From the navigation menu, click Security.
2. In the Passwords and Credentials section, click Edit.
The Password Settings dialog box appears.
3. Click Add.
The Add User to Local Database dialog box appears.
4. In the User Name field, enter the user name. The user name can be 1 to 63 characters in length.
43