Deployment Guide

6
Security
You can view and configure settings for access, authentication, authorization, security, and users on the
Security page.
This page consists of the following sections:
• TACACS+
• RADIUS
• AAA
NOTE: You can only view and configure TACACS+, RADIUS, or AAA settings for M1000e and FN
IOA devices in standalone or VLT mode.
• Passwords and Credentials
TACACS+
Dell Networking OS supports TACACS+ as an alternate method for login authentication for I/O
Aggregator devices. On the
Security page, you can configure up to 10 Terminal Access Controller
Access-Control System Plus (TACACS+) servers.
NOTE: You can only view and configure TACACS+ settings for M1000e and FN IOA devices in
standalone or VLT mode.
This page displays the number of servers configured. On this page, you can perform the following tasks:
• View TACACS+ settings
• Add TACACS+ settings
• Remove TACACS+ settings
Viewing TACACS+ Settings
On the Security page, you can view TACACS+ server settings. You can configure a maximum of 10
TACACS+ servers.
1. From the navigation menu, select Security.
2. In the TACACS+ section, click View Details.
The TACACS Settings dialog box appears.
This dialog box displays the following information about each TACACS+ server:
• Number — System assigned from 0 to 10.
• Source — IP address or host name of the server.
• Key String — Key string used for encryption and decryption.
• TCP-Port — TCP port used to connect to the TACACS+ server.
36