Manualshelf

Concept Guide

ManualsBrandsDell ManualsAccess PlatformsFN IO Module
71727374757677787980
• Specify the minimum severity level for logging to the logging buer.
CONFIGURATION mode
logging buffered level
• Specify the minimum severity level for logging to the console.
CONFIGURATION mode
logging console level
• Specify the minimum severity level for logging to terminal lines.
CONFIGURATION mode
logging monitor level
• Specify the minimum severity level for logging to a syslog server.
CONFIGURATION mode
logging trap level
• Specify the minimum severity level for logging to the syslog history table.
CONFIGURATION mode
logging history level
• Specify the size of the logging buer.
CONFIGURATION mode
logging buffered size
NOTE
: When you decrease the buer size, the system deletes all messages stored in the buer. Increasing the buer size
does not aect messages in the buer.
• Specify the number of messages that the system saves to its logging history table.
CONFIGURATION mode
logging history size size
To view the logging buer and conguration, use the show logging command in EXEC privilege mode, as shown in the example for
Display the Logging Buer and the Logging Conguration.
To view the logging conguration, use the show running-config logging command in privilege mode, as shown in the example for
Conguring a UNIX Logging Facility Level.
Display the Logging Buer and the Logging
Conguration
To display the current contents of the logging buer and the logging settings for the system, use the show logging command in EXEC
privilege mode. When RBAC is enabled, the security logs are ltered based on the user roles. Only the security administrator and the
system administrator can view the security logs.
Example of the show logging Command
Dell#show logging
syslog logging: enabled
Console logging: level Debugging
Monitor logging: level Debugging
Buffer logging: level Debugging, 40 Messages Logged, Size (40960 bytes)
Trap logging: level Informational
%IRC-6-IRC_COMMUP: Link to peer RPM is up
%RAM-6-RAM_TASK: RPM1 is transitioning to Primary RPM.
%RPM-2-MSG:CP1 %POLLMGR-2-MMC_STATE: External flash disk missing in 'slot0:'
%CHMGR-5-CARDDETECTED: Line card 0 present
%CHMGR-5-CARDDETECTED: Line card 2 present
%CHMGR-5-CARDDETECTED: Line card 4 present
Management
77