Concept Guide
Dell#show run qos-policy-input
!
qos-policy-input flowbased
set ip-dscp 3
Dell#
Specifying WRED Drop Precedence
• Specify a WRED prole to yellow and/or green trac.
QOS-POLICY-OUT mode
wred
For more information, refer to Applying a WRED Prole to Trac.
Create Policy Maps
There are two types of policy maps: input and output.
Creating Input Policy Maps
There are two types of input policy-maps: Layer 3 and Layer 2.
1 Create a Layer 3 input policy map.
CONFIGURATION mode
policy-map-input
Create a Layer 2 input policy map by specifying the keyword layer2 with the policy-map-input command.
2 After you create an input policy map, do one or more of the following:
Applying a Class-Map or Input QoS Policy to a Queue
Applying an Input QoS Policy to an Input Policy Map
Honoring DSCP Values on Ingress Packets
Honoring dot1p Values on Ingress Packets
Enabling Fall Back to Trust Diserve or dot1p
3 Apply the input policy map to an interface.
Applying a Class-Map or Input QoS Policy to a Queue
To apply a class-map or input QoS policy to a queue, use the following command.
• Assign an input QoS policy to a queue.
POLICY-MAP-IN mode
service-queue
Quality of Service (QoS)
681