Concept Guide
Where to Go From Here
You can customize the Aggregator for use in your data center network as necessary. To perform additional switch conguration, do one of
the following:
• For remote out-of-band management, enter the OOB management interface IP address into a Telnet or SSH client and log in to the
switch using the user ID and password to access the CLI.
• For local management using the CLI, use the attached console connection.
• For remote in-band management from a network management station, enter the IP address of the default VLAN and log in to the
switch to access the CLI.
In case of a Dell upgrade, you can check to see that an Aggregator is running the latest Dell version by entering the show
versioncommand. To download Dell version, go to http://support.dell.com
For detailed information about how to recongure specic software settings, refer to the appropriate chapter.
Before You Start 39