Concept Guide

Figure 38. Multiple Rings Connected by a Single Switch Example
Important FRRP Points
FRRP provides a convergence time that can generally range between 150ms and 1500ms for Layer 2 networks.
The Master node originates a high-speed frame that circulates around the ring. This frame, appropriately, sets up or breaks down the ring.
The Master node transmits ring status check frames at specied intervals.
You can run multiple physical rings on the same switch.
One Master node per ring — all other nodes are Transit.
Each node has two member interfaces — primary and secondary.
There is no limit to the number of nodes on a ring.
Master node ring port states — blocking, pre-forwarding, forwarding, and disabled.
Transit node ring port states — blocking, pre-forwarding, forwarding, and disabled.
STP disabled on ring interfaces.
Master node secondary port is in blocking state during Normal operation.
Ring health frames (RHF)
324
Force10 Resilient Ring Protocol (FRRP)