CLI Guide

Defaults Not configured.
Command Modes INTERFACE VLAN
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information To display information about a named VLAN, enter the show vlan command with
the name parameter or the show interfaces description command.
Related
Commands
description — assigns a descriptive text string to the interface.
interface vlan — configures a VLAN.
show vlan — displays the current VLAN configurations on the switch.
show config
Display the current configuration of the selected VLAN.
Syntax
show config
Command Modes INTERFACE VLAN
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-if-vl-100)#show config
!
interface Vlan 1
description a
no ip address
mtu 2500
shutdown
Dell(conf-if-vl-100)#
show vlan
Display the current VLAN configurations on the switch.
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the
following information:
Layer 2
967