CLI Guide

Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
show cam mac stack-unit
Display the content addressable memory (CAM) size and the portions allocated for MAC addresses and
for MAC ACLs.
Syntax
show cam mac stack-unit unit_number port-set port-pipe count
[vlan vlan-id] [interface interface]
Parameters
stack-unit
unit_number
(REQUIRED) Enter the keyword stack-unit followed by a
stack member number to select the stack unit for which to
gather information. The range is 0 to 5.
port-set port-pipe (REQUIRED) Enter the keywords port-set followed by a
Port-Pipe number to select the Port-Pipe for which to
gather information. The range is 0.
address mac-addr (OPTIONAL) Enter the keyword address followed by a MAC
address in the nn:nn:nn:nn:nn:nn format to display
information on that MAC address.
dynamic (OPTIONAL) Enter the keyword dynamic to display only
those MAC addresses learned dynamically by the switch.
static (OPTIONAL) Enter the keyword static to display only
those MAC address specifically configured on the switch.
interface interface (OPTIONAL) Enter the keyword interface followed by the
interface type, slot and port information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN
ID to display the MAC address assigned to the VLAN. The
range is from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
960
Layer 2