CLI Guide

Parameters
port-channel-
number
Enter a port-channel number:
The range is from 1 to 128.
Command Modes EXEC
EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related
Commands
show lacp — displays the LACP configuration.
debug lacp
Debug LACP (events).
Syntax
debug lacp [pdu interface [in | out]]
To disable LACP debugging, use the no debug lacp [pdu interface [in |
out]] command.
Parameters
pdu in | out (OPTIONAL) Enter the keyword pdu to debug the LACP
Protocol Data Unit information. Optionally, enter an in or
out parameter to:
• Receive enter in
• Transmit enter out
interface in | out Enter the following keywords and slot/port or number
information:
• For a Ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
Defaults none
Link Aggregation Control Protocol (LACP)
941