CLI Guide

banner motd
Set a message of the day (MOTD) banner.
Syntax
banner motd c line c
Parameters
c Enter a delineator character to specify the limits of the text
banner. The delineator is a percent character (%).
line Enter a text string for your message of the day banner
message ending the message with your delineator. The
delineator is a percent character (%).
Defaults No banner is configured.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information A MOTD banner message displays only in EXEC Privilege mode after entering the
enable command then the password. These banners do not display to users in
EXEC (non-privilege) mode.
Related
Commands
banner exec — enables the display of a text string when you enter EXEC mode.
banner login — sets a banner to display after successful login to the system.
clear alarms
Clear the alarms on the system.
Syntax
clear alarms
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Control and Monitoring
91