CLI Guide

level-2 (OPTIONAL) Independently configures the interval of time

between transmission of CSNPs for Level 2.

Defaults seconds = 10; level-1 (if not otherwise specified)

Command Modes INTERFACE

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The default values of this command are typically satisfactory transmission times for

a specific interface on a designated intermediate system. To maintain database

synchronization, the designated routers send CSNPs.

You can configure Level 1 and Level 2 CSNP intervals independently.

isis csnp-interval

Configure the IS-IS complete sequence number PDU (CSNP) interval on an interface.

Syntax

isis csnp-interval seconds [level-1 | level-2]

To return to the default values, use the no isis csnp-interval [seconds]

[level-1 | level-2] command.

Parameters

seconds Interval of transmission time between CSNPs on multi-

access networks for the designated intermediate system.

The range is from 0 to 65535. The default is 10.

level-1 (OPTIONAL) Independently configures the interval of time

between transmission of CSNPs for Level 1.